EGR Fender Flares — Mitsubishi Triton MV 2024+
- Made to Order — 1–4 weeks (contact us to confirm current lead time)
- Designed for the Mitsubishi Triton MV (2024 onwards) — NOT for MR, ML, MQ, or MN Triton
- CAD designed and manufactured from UV-stable ABS plastic
- Robotically trimmed and painted to OEM standards
- Factory standard style — adds 31mm of guard coverage per side
- No drilling required — uses existing OEM mounting points
- Sensor compatible — no relocation required
- Full hardware kit included — nothing extra to purchase
The EGR Fender Flares for the Mitsubishi Triton MV (2024 onwards) offer best-in-class quality and a first-class finish. Engineered to suit the MV generation specifically, these are the definitive mitsubishi triton mv flares for Australian conditions.
Designed using CAD and vacuum formed from UV-stable ABS plastic, each set is robotically trimmed and painted to OEM standards — arriving ready to fit with no additional preparation required. Available in Ultra Matte Black or colour coded to your Triton MV's factory paint code, the EGR finish is indistinguishable from a factory fitment.
Using existing vehicle mounting points and a purpose-designed hardware kit, these Triton MV 2024 fender flares require no drilling during installation. There is no damage to your vehicle's body, and the fit is guaranteed. Bumper sensors are fully compatible — no removal or relocation needed.
Everything required for installation is included in the box. No additional hardware kits. No surprises.
⚠️ Fitment Note: These EGR fender flares are designed exclusively for the Mitsubishi Triton MV (2024 onwards). They do NOT fit the MR, ML, MQ, or MN Triton. If you own an earlier generation Triton, contact us and we will advise on the correct fitment for your vehicle.
Made to order — lead time is approximately 1–4 weeks. Please contact us before purchasing to confirm current availability.
Note: This product includes a full hardware kit. No additional kits are required.
Documents
Fitting Instructions — Front Set (FF1063)
Fitting Instructions — Rear Set (FF1064)
Note: Fitting instructions are labelled MY23 — the MV generation commenced from 2024 in Australia. These instructions apply to the MV (2024+).
Fitment Guide
| Vehicle | Year | Coverage | Notes |
|---|---|---|---|
| Mitsubishi Triton MV | 2024+ | Wide-body tyre coverage front & rear | Dual cab; no-drill install |
Frequently Asked Questions
Do these flares fit the Triton MV (2024+) only?
Yes — these are shaped to the MV-generation Triton (2024+). They do not suit earlier Triton generations (MQ, MR). For MR Triton, see our separate Triton MR flare range.
How are they installed — is drilling required?
EGR fender flares are designed for a no-drill installation using existing body mounting points and an adhesive bonding system for a clean, factory-style finish.
What is the tyre coverage provided?
The flares provide meaningful additional tyre coverage to help meet ADR protrusion requirements and protect the body from stone chips and mud thrown by wider aftermarket tyres.
What material are they made from?
UV-stable ABS plastic — the same material EGR uses across their flare range — designed to resist fading and cracking in Australian climate conditions.
Are parking sensor cut-outs included?
Yes — where the factory Triton MV includes parking sensors in the rear bumper zone, the flares are profiled to accommodate them without modification.
Quick Fitment Summary
fitment, coverage & install info
Fitment
- Mitsubishi Triton MV (2024+)
- MV generation only — 2024 onwards
- Does NOT fit MR, ML, MQ, or MN Triton
- OEM mounting points
- Does NOT suit MV GSR — EGR flares will not cover the holes left in the tub by the factory GSR flare
Coverage
- [SPEC NEEDED]mm per side
- [SPEC NEEDED]mm total coverage
- Factory-standard style
Install
- No drilling required
- DIY friendly
- Full hardware kit included
- Made to order — 1–4 weeks
Flare Coverage Explained Wheel sizes, coverage & fitment info
-
What These Flares Cover
When fitting wider wheels or tyres to your Mitsubishi Triton MV, the outer edge of the tyre can extend past the factory guards. Fender flares add extra guard coverage, helping protect your paintwork and ensuring the tyre tread is covered when viewed from above.
These EGR Fender Flares are designed specifically for the Mitsubishi Triton MV (2024 onwards) and use existing OEM mounting points — no drilling required.
Recommended Wheel & Tyre Fitment
These flares are suited to wider-than-factory wheel and tyre setups on the Triton MV. Coverage is [SPEC NEEDED]mm per side.
Final fitment depends on your specific wheel width, offset, and tyre profile. Not sure? Contact us before ordering.
-
How These Flares Help
- Adds approximately [SPEC NEEDED]mm of guard coverage per side
- Designed to suit the Mitsubishi Triton MV (2024 onwards)
- Does NOT fit the MR, ML, MQ, or MN Triton
- Does NOT suit the MV GSR — EGR flares will not cover the holes left by the factory GSR flare
- Compatible with wider-than-factory wheel and tyre setups
- Sensor compatible — no relocation required
(Check with us if unsure about your specific wheel setup.)
Not sure if these suit your setup? Contact us before ordering.
Frequently Asked Questions
Find answers to common questions about EGR Fender Flares for the Mitsubishi Triton MV 2024+
Do these EGR fender flares fit the Mitsubishi Triton MV 2024?
Yes — these EGR Fender Flares are purpose-built for the Mitsubishi Triton MV (2024 onwards). They are a direct fitment using existing OEM mounting points and require no modifications to the vehicle.
If you are unsure which generation your Triton is, contact us before ordering and we will confirm fitment for you.
Which Triton generation is the MV?
The Mitsubishi Triton MV is the current generation, released in Australia from 2024 onwards. It is the successor to the MR Triton, which ran from approximately 2019 to 2023.
These EGR fender flares are designed for the MV (2024+) only. They are not compatible with any earlier Triton generation including the MR, ML, MQ, or MN.
Will these fit an MR, ML, MQ, or MN Triton?
No — these EGR fender flares do not fit the MR, ML, MQ, or MN Triton.
Each Triton generation has different guard geometry and OEM mounting configurations. This kit is designed specifically for the MV (2024 onwards) and is not compatible with earlier generations.
If you own an MR, ML, MQ, or MN Triton and need fender flares, contact us and we will advise on the correct fitment for your vehicle.
Is any drilling required to fit these flares on the Triton MV?
No drilling required. These EGR fender flares attach directly to the Mitsubishi Triton MV using existing OEM mounting points — no modifications to the bodywork are necessary.
All required mounting hardware and fitting instructions are included in the kit. It is a DIY-friendly installation.
What colours are available for the Triton MV EGR fender flares?
EGR Fender Flares for the Mitsubishi Triton MV are available in two finish options:
- Ultra Matte Black — from $899
- Colour coded to your Triton MV's factory paint code — from $1,299
Colour coded options include: Black Mica (X37), Blade Silver (U33), Impulse Blue (D23), Graphite Grey (U28), Red (P63), White Diamond (W85), and White (W19).
All colour coded flares are robotically trimmed and painted to OEM standards for a factory-quality finish.
What is included in the kit?
Each EGR Triton MV fender flare kit includes:
- Full set of fender flares (front and rear)
- All required mounting hardware
- Fitting instructions
No additional hardware kits are required — everything needed for installation is included in the box.
How long does delivery take?
These EGR Triton MV fender flares are made to order and typically take 1–4 weeks from order to dispatch.
Lead times can vary depending on current production schedules. We strongly recommend contacting us before purchasing to confirm the current estimated lead time.
Do these fit the Triton MV GSR?
No — these EGR fender flares do not suit the Mitsubishi Triton MV GSR.
The GSR variant comes with factory fender flares that leave larger holes in the tub when removed. The EGR flares are not wide enough to cover these holes, leaving visible gaps in the bodywork.
If you own a Triton MV GSR, contact us before ordering and we will advise on suitable options.